RX8900 temperature register: keep the raw code before converting to Celsius
Original diagram (Chinese labels). Illustration from the original MERLIN guide. See the article for calculation assumptions and applicability. Manufacturer reference ↗

Manufacturer conversion and update behavior

Page 22 of the RX8900 application manual ETM45E-10 gives temperature in °C as (TEMP[7:0] × 2 − 187.19)/3.218. The data updates when the temperature compensation circuit operates. Reading the register does not itself trigger each conversion.

Preserve the code and calculation precision

Treat TEMP as an unsigned 8-bit value. Use floating point or sufficient fixed-point precision and retain the manufacturer constants. One code step corresponds to about 0.6215 °C. Raw 129 converts to approximately 22.004 °C, displayed as 22.00 °C after rounding. Display precision is different from update granularity and absolute accuracy.

Readings of 129, 129 and 130 may be normal discrete codes. Check operating conditions and the documented update mechanism before treating repeated reads as a communication fault.

ItemValueLimit
Conversion(raw × 2 − 187.19)/3.218Keep manufacturer constants
Raw 129About 22.004 °CIllustrative input
One code stepAbout 0.6215 °CDifferent from accuracy
Repeated codeCheck update mechanismInsufficient to diagnose failure
raw = 129  # Example input, not measured
temperature_c = (raw * 2.0 - 187.19) / 3.218
print(f"{temperature_c:.2f}")  # 22.00

Verify firmware and hardware separately

Use fixed inputs 0, 129 and 255 to check unsigned handling and avoid integer truncation. Boundary-code tests exercise arithmetic only and do not imply those temperatures are within the operating range. For board tests, record timestamps, raw bytes, converted data, configuration and an independent temperature reference.

References and scope

Manufacturer documentation

MERLIN used AI assistance to compile this technical guide. Numerical examples are hypothetical unless identified as manufacturer specifications. They are not sample measurements, compatibility guarantees, or statements of availability.

Related selection resources

Epson timing devices and model documentation