Crystal & Frequency Control Componentssales@mecxtal.com.cn0755-26500570
CRYSTAL PROCUREMENT NOTES

100 MHz and 125 MHz Differential Oscillator Sourcing

Prepare a 100 MHz or 125 MHz low-jitter clock RFQ with LVDS, LVPECL, or HCSL output, supply voltage, package, termination, and jitter integration bandwidth. Browse the series pages for specifications.

MERLIN Timing Components provides part documentation and helps with selection and sourcing for crystals, oscillators, and frequency-control components.

Submit Part Numbers and Sourcing Requirements
Interface checks for differential clock sourcing
Original diagram (Chinese labels). Illustration by MERLIN, based on this guide and the cited manufacturer references. Manufacturer reference 1 ↗ See the relevant sections for specific values and conditions.

Specify the full requirements for a 100 MHz or 125 MHz differential oscillator

Oscillators at the same frequency can use different outputs, supplies, packages, and enable functions. The 100 MHz and 125 MHz examples illustrate how to write a sourcing request. Confirm the exact configuration and availability with the supplier.

Check the receiver for LVDS, LVPECL, or HCSL

Retain the original receiver or oscillator documentation. Check the output standard, logic levels, common-mode requirements, supply, load, and termination together. A differential output, matching pin count, or similar package alone cannot establish compatibility.

Include the integration bandwidth when specifying low jitter

When comparing jitter, record the integration bandwidth and test conditions. Match the output, supply voltage, and load. Phase noise and integrated jitter cannot be converted from a single value without the relevant measurement information.

Share these requirements with purchasing and engineering

Sourcing requirementInformation to provide or verify
Frequency and full part numberSpecify 100 MHz, 125 MHz, or the exact frequency required. Retain the brand and every ordering suffix.
Output and supplySpecify the actual interface, such as LVDS, LVPECL, or HCSL, plus voltage, termination, and load.
Package, pins, and functionsFor 2520, 3225, 5032, and 7050 packages, confirm the actual dimensions, land pattern, pin assignments, and enable logic.
Noise, temperature range, and quantitiesInclude the jitter target and integration bandwidth, phase-noise requirement, temperature range, sample and production quantities, and target delivery.

Sourcing FAQ

Can a 100 MHz HCSL oscillator replace a 100 MHz LVDS oscillator?

Verify the output levels, common mode, termination, load, receiver requirements, and pin assignments. Frequency and differential signaling alone cannot establish compatibility.

What should I specify for a 125 MHz low-jitter oscillator?

Include the full part number or target specification, jitter limit, integration bandwidth, test conditions, output interface, supply voltage, temperature range, and package.

Where can I find data for 7050 and 5032 differential oscillators?

Follow the differential oscillator category and series links for the original parameters and specification drawings. Confirm the frequency, output, and purchasing terms for the exact ordering code.

Send Your RFQ to MERLIN

MERLIN Timing Components provides part documentation and helps with selection and sourcing for crystals, oscillators, and frequency-control components. Send the full part number or target specification, expected quantity, and required delivery date. Confirm specific parts, samples, and purchasing terms separately.

Check the package and output together for 100 MHz and 125 MHz oscillators

100 MHz and 125 MHz are separate ordering requirements. List the exact frequency, receiver interface (LVDS, LVPECL, or HCSL), supply voltage, package, and temperature range together. If the request says only “7050 125 MHz,” confirm the oscillator output first, then check the package drawing and pin table.

Match the integration band and test conditions when comparing two low-jitter datasheets. Ask the supplier for any missing test details before comparing the figures. For a replacement on an existing board, also check the enable pin and termination scheme.

Differential Outputs and Packages · 7050 LVDS Series · 7050 HCSL Series · TI Application Note on Differential Termination

Let’s work from your requirements.

Brand, frequency, quantity and delivery target — a useful place to start.

WeChat

MERLIN · TIMING COMPONENTS

Scan with WeChat to connect

Add our WeCom contacts from your usual WeChat app.

On desktop, scan with your phone. On mobile, save the QR image and select it from your album in WeChat Scan.